Bargue Exercises

Here are some Bargue copies that I practice during my free time.  These copies were made using comparative measurement.

Below are some more Bargue copies that I used to make in my sketchbook by first marking out the accurate height to width and finding all the shapes by comparing my copy to the Bargue and plumbing within my copy.  Since first marking out the accurate height to width is cheating I now make all of my Bargue copies using comparative measurement.

Here are some images of the type of studies that I have been making recently.  I am focusing on Bargue copies and cast block-in drawings so that I can practice getting better proportions and more accurate shapes.

Peggy Shepard

This is a portrait of another notable environmentalist named Peggy Shepard.  She has been a huge advocate for reducing air pollution in urban New York City.  Her organization WE ACT for Environmental Justice is helping to create a healthier environment amongst the urban population.
      This is the last final illustration that I plan to make for a while.  I am dedicating at least the next 4.75 years of my life to the study of classical drawing and painting and plan to pursue an illustration career after my atelier education is complete.  I am currently working on my portfolio for application to The Grand Central Academy of Art and will remain focused on the study of classical drawing and painting until my atelier training is completed. This is the method that trained the artists that I admire and I must focus on the technical skills that are most essential to the creation of effective traditional art.

Bouguereau Copy

I have been working on this copy of Bouguereau's Gabrielle Cot for a while.  I posted the drawing study that I made for this copy earlier and now will post my process for working on the painted copy.

Artist: William Bouguereau
Title: Gabrielle Cot (grayscale, detail)
Date: 1890
Dimensions: 13.8 x 10.7(the same size as the detail of the original painting)
Material: Oil on linen

Materials for copy
Support: Linen, rabbit skin glue (2 coats), Gamblin oil ground (with 1/4 calcium carbonate, 1/8 OMS( the ground was made by first dumping half of the bucket of Gamblin Oil ground on a sheet of metal.  Then 1/2 parts of calcium carbonate was mixed with the Oil Ground.  Then 1/4 parts of Odorless Mineral Spirits was mixed in with the oil ground.  Then that mixture was mixed with the other original half of Gamblin Oil ground.  This mixing was done in only 1/2 of the ground at first to ensure that the materials would be well mixed.), some burnt sienna and ivory black pigment mixed with the ground) applied in 2 coats.

Painting tools: various sizes of Sable filberts (2-8)(I bought my brushes from Rosemary brushes rosemaryandco.com. These brushes are very soft and they are cheaper than any other sable brushes I looked at.), various sizes of round sable blend brushes (0-8), a #4 Fan brush(also bought from Rosemary brushes and some from Utrecht), various sizes of round hog bristle brushes, various sizes of round bristle brushes, metal palette knife, wood palette (coated with 4 layers of shellac), soft rag

The wood pallet I used that I bought from Utrecht.  My teacher, Lance Moore, told me it was a bit too bright so I don't know if I would recommend it.  But it was great to use a pallete that I could hold in my hand.  It allowed me more flexibility while painting.)
Pigments:
Winsor and Newton- Flake White No.1, Ivory Black

Mediums:
For the ebauche and study- 6 parts gum turpentine, 1 part linseed oil, 3 drops of copal
-This medium is very movable with a fan brush and dries matte. It takes 3 days to dry.  If too much copal is added to this medium additional layers of paint film on top of it have trouble with adhesion and it becomes harder to move it around.
For glazing and painting- 5 parts turpentine, 1 part stand oil, 1 part Damar (1/5 of this part contained gum elemi), 1 drop Siccatif de Courtrai(a 19th century drier composed of lead and manganese). This is a version of the glazing medium that Ralph Mayer states was used as a glazing medium in the 19th century.  From some excerpts from Bouguereau's notebooks that I found in William Bouguereau, 1825-1905: Musée Du Petit-Palais  it is known that he used a little of gum elemi in his glazing medium and he stated that he used 1 drop of Siccatif de Courtrai in his medium. 

Above is a picture of  the solid form of gum elemi as I received it.  The gum elemi was mixed into the damar varnish by 1st heating the elemi on a stove to remove the impurities.  Then I put what was 1 part of Damar varnish into the pan(I had tin foil on top) and 1/5 of a part of the solid gum elemi into the pan and heated and mixed it until they were completely mixed together.

• This medium added gloss. I could see some of my reflection while the paint was wet. It never dried too shiny.  This medium comes to tack fairly quickly but while wet is quite movable with a blending brush. This medium dries within 12 hours.
• I must note that for the 1st 2 layers of this painting the medium contained no gum elemi and for some of the final layers I stopped using the gum elemi because the medium was getting too tacky.  I added a drop of linseed oil to this medium for successive layers to allow for the paint to be more flexible on the surface.
• The glossy effect of this medium would have been seen best on a smoother surface. Due to a misunderstanding I painted my copy on a slightly textured linen.  I was supposed to put enough ground on the surface to cover the texture and then sand it down so that it was absolutely smooth before painting.  According to Michael Swicklik 19th century painters would apply a viscous layer of mastic over the surface before painting.   The mastic was dissolved in mineral spirits and as soon as the mineral spirits evaporated the mastic filled in any remaining texture on the surface.  The drawback to this method is that a ground like that is very vulnerable to cracking.  Because mastic is a resin it always stays vulnerable to solvents.  Therefore as paint film and solvents are applied over a ground of resin the resin continues to move as the paint dries.  So when a dried paint layer is moved by the resin ground the paint film cracks.  The textured surface I used was difficult to paint on because I had to work harder to get a smooth effect or stroke.  This also meant that I had to try to add more paint than I was supposed to in the light to fill in the pores of the surface. Also, many of the effects that I was trying to emulate from Bouguereau in this copy could only be done on a smooth surface so it limited me in that respect as well. 

Step 1: Stretch canvas. I was not supposed to originally stretch the linen too tightly because the rabbit skin glue tightens the linen so much.  Because I did so when I applied the rabbit skin glue it strained the surface so much that there were some tiny holes.  Apply 2 coats of rabbit skin glue to the surface. After glue dried I mixed burnt sienna and ivory black pigment with Gamblin oil ground to produce a light and slightly warm ground color. This was the ground color that I noticed in Bouguereau's studies.  To apply the ground to the surface I thinned out the ground with either turpentine or mineral spirits and applied it to the surface in 2 coats. Light Sanding with 220 sandpaper between each coat. The ground was applied with a brush and then scraped down with a plastic palette knife.
Here are the steps I followed previous to sanding down the surface to start over.
I made a smaller study at 4x6 inches.  I only got about 3 layers into glazing the form up to the light. A picture of it is below with numbers used to label the stages of darkening glazes from 1(for the 1st glaze) to 5(for the last glaze).  I used this study as practice and as a reference for a simplified version of the painting while I was making my copy.  The surface I used for this study was much smoother and was easier to glaze on.

I scanned my drawing study.  I put the print out on a light box and on the back rubbed a 4B pencil along the contour and inside landmarks.  Then I placed the scanned image on top of my surface and used a 4H pencil to transfer the graphite on the back of the paper to the surface.  Because the surface was so textured I had to push pretty hard.  I then inked the drawing with very diluted india ink.  Then I sealed the drawing with a mixture of copal and turpentine(mostly turpentine).  This darkened the lines a bit. The lines were to be light so that they would dissapear after the ebauche.  Bouguereau's method of painting was very atmospheric and a visible contour line would ruin that effect.  Still I think I made it too light because it was difficult to see the drawing as the copy progressed.  An image of the copy at this stage is below.

Then I did an ebauche. Below is an image of it at different stages of development.  I initially used hog bristle brushes to sort of rub in the tones on top ground.  It wasn't very dark but was used to set the drawing in place.  In this image it can be seen in the thinner areas of paint. Then I did my ebauche completely thin and then with more paint as I glazed up the lighter areas.

This surface was way too textured for me to deal with so I sanded it down and started over.  An image of the sanded surface is below.

Step 2: Drawing study was scanned and printed full size on regular copy paper. A thin gray mixture of zinc white and ivory black paint was applied on the back of the paper with a bristle brush that contained no medium. The drawing was transferred by pressure of a 4H lead pencil against the oil paint that was underneath the paper. The lines that had pressure applied to them resulted in a transfer of oil paint to the surface. The lines were light in value. Let the surface dry overnight. Went over the drawing with diluted India ink.
Step 3: Lightly scrubbed in the drawing using ivory black diluted with turpentine. Used bristle brushes. Only used a sable brush for edges. The surface was so rough that I had to press hard to see a satisfactory result in values. It was important that this scrub in be dark in values because the original painting was developed from a dark undertone. Because the some linen was exposed from my sanding it sucked up most of the paint in this layer so this layer didn’t get that dark.
Step 4: Ebauche of entire painting again using sable brushes. I made the light areas too dark.  I was supposed to use the grey of the ground as the base tone for the lights but I instead went darker thinking that it would make the lights appear brighter after glazing.  That wasn't true.  Instead, this resulted in me having to apply more layers than I should have to the painting (the image of this ebauche is the image of the example ebauche above).
Step 5: Proceeded with painting by darkening the background and lightening areas in the face. Each session started by couching the area I was to paint with a thin layer of my paint medium. The surface was very textured and I needed it to be smooth to match the qualities of the original so I tried applying the paint in the light areas very opaquely but since I was using sable brushes it never really got opaque enough to be smooth. Made use of sable fan brush to keep the painting atmospheric. I blended down everything while trying to imagine the form of the face as an egg where all of the forms were to be smoothly connected.  For most of the painting I wanted the form to appear soft and smooth.  The rule was, if I could still see strokes of paint then it wasn’t smooth enough and I didn't want to rely too much on the fan brush to make the form smooth. But I did try to follow the types of strokes that I saw in the original by first asking my self how the form turned and then looking to the print to see what type of strokes Bouguereau used to achieve that form. Most of these strokes were blended but some impression of them remained.
Step 6: The painting proceeded with many layers of lightening the form with small value differences between each layer. Each successive layer contained a bit more linseed oil in the painting medium. I always thought I was making too much of a value jump between the layers until I would add a lighter layer on top and see that it was still not light enough. Images of the copy at successive stages are below.  I lost the photos of earlier stages of the copy before I uploaded them to a computer so the process shots below are from about 8 or 10 glaze passes into the copy.

The setup. I got some white paint on the reproduction by accident.

Glazing up the form. I proceeded by glazing up the form area by area and then connecting parts of the portrait from there. For example, working from the forehead to the nose to the cheek etc.

I added the highlights and sharper edges in my last session. I scanned it at Fedex an am hoping to get a better reproduction of it later.  The bottom one is another scan but some reflected light was still getting into it. I still want to work on it more but I have to move on to some other projects now, but I should be able to revisit it before the end of the year.

Below is a better photograph of it.

References:
-Bouguereau, William Adolphe. William Bouguereau, 1825-1905: Musée Du Petit-Palais, Paris, 9 February-6 May 1984, the Montreal Museum of Fine Arts, 22 June-23 September 1984, the Wadsworth Atheneum, Hartford, 27 October 1984-13 January 1985. [Montreal]: Montreal Museum of Fine Arts, 1984.

• Bartoli, Damien, and Frederick Ross. William Bouguereau Catalogue Raisonné of His Painted Work. Woodbridge: Antique Collectors' Club, 2010.
• Michael Swicklik, "French Painting and the Use of Varnish, 1750–1900," in Conservation Research (Washington, D.C., 1993), 157–74